Jump to content

Laptop to HDMI output problem


Gaz

Recommended Posts

I have an old beat-up laptop that was just gathering dust, so I've put it on a shelf above my telly and hooked it up via HDMI. So far, so good. I've got it set so that it displays on the second screen only so it's really just using my telly as a big monitor.

However every time the laptop goes to sleep, when I put it back on it displays the signal on the laptop's monitor and not the telly. I need to unplug the HDMI cable from the laptop and plug it back in. This is a bit of a pain in the arse given that the laptop is on a shelf above my telly.

Any possible solutions as to how I can stop it doing this?

Cheers!

Link to comment
Share on other sites

49 minutes ago, Ginaro said:

Go to settings > display and try the "detect" button?

Nah doesn't work - when I try that it doesn't detect another display. Have to physically pull the HDMI cable out the laptop and plug it back in.

Link to comment
Share on other sites

I have an old beat-up laptop that was just gathering dust, so I've put it on a shelf above my telly and hooked it up via HDMI. So far, so good. I've got it set so that it displays on the second screen only so it's really just using my telly as a big monitor.
However every time the laptop goes to sleep, when I put it back on it displays the signal on the laptop's monitor and not the telly. I need to unplug the HDMI cable from the laptop and plug it back in. This is a bit of a pain in the arse given that the laptop is on a shelf above my telly.
Any possible solutions as to how I can stop it doing this?
Cheers!
Have you got it set to duplicate displays rather than extend? You could also try setting the TV as the main display but not sure that would make much difference
Link to comment
Share on other sites

50 minutes ago, Mr X said:
13 hours ago, Gaz said:
I have an old beat-up laptop that was just gathering dust, so I've put it on a shelf above my telly and hooked it up via HDMI. So far, so good. I've got it set so that it displays on the second screen only so it's really just using my telly as a big monitor.
However every time the laptop goes to sleep, when I put it back on it displays the signal on the laptop's monitor and not the telly. I need to unplug the HDMI cable from the laptop and plug it back in. This is a bit of a pain in the arse given that the laptop is on a shelf above my telly.
Any possible solutions as to how I can stop it doing this?
Cheers!

Have you got it set to duplicate displays rather than extend? You could also try setting the TV as the main display but not sure that would make much difference

I've got it set to display only on the second screen (the telly) as I don't want it to display on the monitor as well.

Everything works absolutely fine and as intended until I either switch the laptop off or put it to sleep, then when it comes back on it doesn't recognise the telly at all until I unplug and replug the HDMI cable from the laptop.

Link to comment
Share on other sites

I've got it set to display only on the second screen (the telly) as I don't want it to display on the monitor as well.
Everything works absolutely fine and as intended until I either switch the laptop off or put it to sleep, then when it comes back on it doesn't recognise the telly at all until I unplug and replug the HDMI cable from the laptop.
Might be a stupid question but is the TV on when you switch the laptop on?
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...